Phone Hours
Mon-Fri
9AM - 5 PM
Central Time
Local: 325-227-6903
Toll Free: 866-807-4337
Email: sales@electricrider.com Service Dept: 325-227-6903 Go green with a company who will back
you up! Buy with confidence, we'll be here when you need us!
ElectricRider
1301 Pulliam Street
San Angelo, TX 76903
In our 11th year of service to the electric bike and LEV community
We're always trying to find a better way to do things, and we think we have
the answer for SLA batteries. This is an elegant solution. We designed and
manufacture these battery hangers and simulated leather bags - another
ElectricRider exclusive.
- Lower center of gravity. Your bike will not feel “top heavy”, so is
safer and easier to handle both when riding and when parking.
- The rear carrying rack is now free for other uses.
- The batteries are completely out of your way during normal use. That makes it
easier to get on and off the bike since the batteries are not directly behind
the seat. Leaves room for your leg to swing over.
- Your bike will be less apt to fall over when parked on a kickstand.
- The battery hanger system will work with most all brands of rear carrying
racks.
- The battery hanger system is fully customizable for your project by drilling
holes where needed.
- Width-6.5 x Height-7.5 x Depth-3.25
Our hangers connect to the axle at the bottom and to the rack
at the top. The batteries hang way down to lower the center of gravity, making for
easier handling. Hangers work well with 12V 12AH (standard on Phoenix) SLA batteries.
They can work with 12V 10AH batteries (standard on Sparrow and RoadRunner),
but you might have to fill the extra space in order to strap them tight to the
brackets.
Note: Brackets will not work with quick-release rear wheel
unless you are replacing the quick-release rear wheel with a rear motor. If you
have a rear suspension bike, brackets will fit as long as the bike rack to which
the brackets attach connects to the frame below the seat rather than the seat
post. In other words, the rack must move with the suspension -- it cannot be
connected to a moving part (axle) and a non-moving part (seat post). For frames
with rear suspension, we recommend drilling a couple holes in the battery
brackets where needed in order to attach them directly to the frame, making the
rack unnecessary.
Note: Brackets do not have to be installed on the rear axle.
Due to their simple design, they can be mounted just about anywhere on a bike
frame just drilling holes in the proper place on the brackets.
Our electric bike battery hangers with bags give your
electric bike a professionally built look and feel
Hangers ready to be installed
Hangers mounted on bike
Side view installed with 12V 12AH batteries
and rear Phoenix motor
Rear view installed with 12V 12AH batteries
and rear Phoenix motor
Battery Brackets (pair)
$79.99
Put in cart for shipping estimate
Simu-leather Cases (pair)
$79.99
Put in cart for shipping estimate
Battery brackets (pair) with
simu-leather cases (pair)
Phone Hours
Mon-Fri
9AM - 5 PM
Central Time
Local: 325-227-6903
Toll Free: 866-807-4337
Email: sales@electricrider.com Service Dept: 325-227-6903 Go green with a company who will back
you up! Buy with confidence, we'll be here when you need us!
ElectricRider
1301 Pulliam Street
San Angelo, TX 76903
In our 11th year of service to the electric bike and LEV community
