|
Part
Number
|
Description
|
Price
|
Purchase
|
Breaker50
| Auto Reset Circuit Breaker 50 Amp | $9.99 |
|
EMX-072
| LashOut Battery Extension | $15.00 |
|
HeatShrink.017
| One foot of Heat Shrink - 1/16 inch diameter Shrink Ratio 2:1 | $0.89 |
|
HeatShrink.25
| One Foot of Heat Shrink Tubing 1/4 inch - Shrink Ratio 2:1 | $1.59 |
|
HeatShrink.5
| One Foot of Heat Shrink Tubing 1/2 inch - Shrink Ratio 2:1 | $1.99 |
|
HeatShrink1.0 | One Foot of Heat Shrink Tubing 1 inch - Shrink Ratio 3:1 | $2.99 |
|
Jack3P
| Three-prong jack | $4.99 |
|
JackXLR-CM
| XLR Jack Cable Mount | $6.99 |
|
JackXLR-SM
| XLR Jack Surface Mount | $6.99 |
|
Plug2P
| Two Pin Power Plug | $4.99 |
|
Plug3P
| Three Pin Power Plug | $4.99 |
|
PlugXLR
| XLR Plug / Microphone Plug | $0.59 |
|
Splitter25
| .25 inch splitter female to two male | $0.99 |
|
SY992-10
| Anderson 50A 10ga Connector Gray | $7.99 |
|
Wire16-BK | One Foot of Black 16g Wire - Stranded | $1.69 |
|
Wire16-RD | One Foot of Red 16g Wire - Stranded | $1.69 |
|
X-Extn
| Battery wire extension with anderson connector | $16.99 |
|
X-Extn2P
| Extension wire with 2 pole flat connector to stripped end | $9.99 |
|
X-Extn-BRAKE
| Extension for Crystalyte Brake Inhibits | $12.99 |
|
X-Extn-CTK
| Extension for Crystalyte Cruise Control | $12.99 |
|
X-Extn-HE
| Hall Effect Sensor Wire Extension for Crystalyte Motor | $12.99 |
|
X-ExtnPwr3P
| Phoenix Power Wire Extension (3-prong flat black connector) | $13.99 |
|
X-ExtnPwrHE
| Phoenix Power and Hall Effect Wire Extension | $18.99 |
|
X-ExtnPX
| Battery wire extension with 50A Anderson connector on both ends | $23.99 |
|
X-Extn-REV | Extension for Crystalyte Reverse Switch | $12.99 |
|
X-Extn-THR
| Throttle Extension for Crystalyte Throttles | $12.99 |
|
X-FuseHolder
| Fuse Holder up to 40A includes 40A fuse | $9.99 |
|
X-FuseHolder50
| Fuse Holder 50A includes fuse | $12.99 |
|
X-HESens-B
| Hall effect sensor - Blue Signal/Return wire | $5.99 |
|
X-HESens-G
| Hall effect sensor - Green Signal/Return wire | $5.99 |
|
X-JackXLR
| XLR Jack with 3ft of wire attached | $7.99 |
|
X-Jumper
| Jumper wire appx 6 inches with 1/4 inch terminals each end | $0.99 |
|
X-Jumper2
| Jumper wire appx 36 inches with 1/4 inch terminals each end | $6.99 |
|
X-Plug2F
| Female 2-pin black connector for Crystalyte (includes contacts) | $1.49 |
|
X-Plug2M
| Male 2-pin black connector for Crystalyte (includes contacts) | $1.49 |
|
X-Plug3F
| Female 3-pin black connector for Crystalyte (includes contacts) | $1.49 |
|
X-Plug3M
| Male 3-pin black connector for Crystalyte (includes contacts) | $1.49 |
|
X-Plug4F
| Female 4-pin black connector for Crystalyte (includes contacts) | $1.49 |
|
X-Plug4M
| Male 4-pin black connector for Crystalyte (includes contacts) | $1.49 |
|
X-Plug5F
| Female 5-pin black connector for Crystalyte (includes contacts) | $1.49 |
|
X-Plug5M
| Male 5-pin black connector for Crystalyte (includes contacts) | $1.49 |
|
X-PlugHE-F
| Female 5-pin silver Mini-XLR connector for Crystalyte Hall Effect | $3.99 |
|
X-PlugHE-M
| Male 5-pin silver Mini-XLR connector for Crystalyte Hall Effect | $3.99 |
|
X-PxAdapt1
| Connects 3 prong connector motor to bullet connector controller | $16.99 |
|
X-PxAdapt2
| Connects bullet connector motor to 3 prong connector controller | $16.99 |
|
X-PXPWR-A
| Phoenix Power Wire - Bullet Connectors | $8.99 |
|
X-PXPWR-B
| Phoenix Motor Power Wire - 3-Prong Flat Connector | $19.99 |
|
X-RRPWR
| RoadRunner Power Wire - 3-Prong Flat Connector | $18.99 |
|
X-SPPWR-A | Sparrow Power Wire | $4.99 |
|
X-WireSet
| Wireset minus Anderson, fuseholder and fuse | $17.99 |
|
X-WireSet36
| Wire Set 36V - For Sparrow and RoadRunner | $29.99 |
|
X-WireSet36-PX
| Wire Set 36V - For Phoenix systems | $34.99 |
|
X-WireSet48
| Wire Set 48V - For Sparrow and RoadRunner | $30.99 |
|
X-WireSet48-PX
| Wire Set 48V - For Phoenix systems | $35.99 |
|
X-WireSet72
| Wire Set 72V - For Phoenix system (Two charger ports for two 36v chargers) | $39.99 |
|
X-WireSet72-2
| Wire Set 72V - For Phoenix system (One charger port for 72v charger) | $36.99 |
|
