Accessories  Batteries  Battery Chargers  Belts  Body  Brakes  Cables  Cargo  Chain  Chargers  Connectors  Controllers  Drive Belts  Engine  Fuses  Gauges  Gears  Headlights  Horns  InnerTubes  Lights  Motors  Rims  Speed Controllers  Sprockets  Switches  TailLights  Throttles  Tires  Tools  Tubes  Wheels  WireConnectors

Vego SX600 and Vego IQ450 Batteries

As of March 2008, we do not have enough orders to have these batteries manufactured. The manufacturer requires a minimum, most of which would be discarded at the end of their shelf life.

Below are some alternative ways to power your Vego scooter. They do not restore its original capacity, but they bring it to 90% of its original range (distance per charge). Please be careful with batteries and associated wiring. You won't get shocked, but each battery has enough power to melt copper, aluminum, thin steel, etc. 

For SX600, you can squeeze four 12V 10AH batteries into the space. We've tried it.. it works, but you have to turn the scooter upside down to coax the batteries out. It is a tight fit. If your connectors are bad, replace them with something standard like Anderson 50A connectors (you need two to make a connection -- one on the scooter, one on the battery pack). 

For IQ450, you can get 10AH batteries into the space, but you have to use foam or some other material to hold the front battery in place to keep it from damaging the circuit breaker.

Be sure to observe the polarity of the old batteries and connect the new ones the same way. You'll find that battery 1 negative connects to the scooter, battery 1 positive connects to battery 2 negative, and battery 2 positive connects to the scooter.

These are the best solutions we have to offer. Since Vego has been out of business for so long, it is not likely the situation will improve. The only scooter we know of that is comparable in reliability and quality is the GoPed ESR750.

Questions about delivery time? Click here for Delivery Zone Chart.