BionX console code access instructions

Last Reviewed: Mon, 27/Mar/2017


We do not recommend accessing any console codes unless you've been instructed to do so by a BionX technician or by this troubleshooting guide. Changing or tweaking console codes at random is very inadvisable and will certainly lead to a system which does not function properly. Please make good notes of all console code values before and after you change them so you will be able to backtrack if necessary.


There are slightly different processes for accessing diagnostic mode depending on whether you have a G1 or G2 console. Not sure which you have? Call us to get assistance at 325-227-6903

G1 Console - console code access

  1. With the battery installed on your bike, turn the BionX on.
  2. Hold down "Mode" and "Chrono" until you see 4 zeroes.
  3. Enter the 4 digit code by using plus/minus to change each number and "Mode" to move to the next number.
  4. Press "Mode" one more time to confirm the code

 

G2 Console - console code access

  1. With the battery installed on your bike, turn the BionX on.
  2. Hold down "Power" and "Mode" until you see 4 zeroes.
  3. Enter code the 4 digit code by using plus/minus to change each number and "Power" to move to the next number.
  4. Press "Power" one more time to confirm the code


Leave a comment

Please note, comments must be approved before they are published